User`s manual

friendly. However, due to different behavior of different Web browser types

and versions, HTTP-based firmware management operations may not work

properly with some Web browsers. If users cannot successfully perform

HTTP-based firmware management operations with the Web browser, try the

TFTP-based method.

Upgrade Firmware via HTTP

y Click <Browse> and then select a correct firmware .bin file. The

firmware file path will be shown in the Firmware file name text box.

y Click <Upgrade> to begin the upgrade process.

Backing up and Restoring Configuration Settings via HTTP

y Click <Back Up>.

y Users will be prompted to open or save the configuration file. Click

<Save>.

y The configuration file is named by the AP’s MAC address. For

example, if the AP’s MAC address is 00-01-02-33-44-55, the

configuration backup file should be “000102334455.hex”. Don’t

change the configuration file name in the Save As dialog box. Select a

folder in which the configuration file is to be stored, then click <Save>.

To Restore Configuration via HTTP

y Click <Browse> and then select a correct configuration .hex file.

Make sure the file name is the AP’s MAC address. The firmware file

path will be shown in the Firmware file name text box.

y Click <Restore> to upload the configuration file to the AP.