User`s manual

installing dynamic bridging, use the Link Monitor feature on the AP Client side

to help align the directional antennas.

2.7 Setting up Client Computers

The TCP/IP and IEEE 802.11b-related settings of wireless client computers

must match those of the AP.

2.7.1 Configuring SP915-1000 Related Settings

Before the TCP/IP networking system of a wireless client computer can

communicate with other hosts, the underlying wireless link must be

established between this wireless computer and an AP.

To establish wireless link to the AP:

y Launch the configuration/monitoring utility provided by the vendor of

the installed WLAN NIC.

y Use the utility to make appropriate Operating Mode, SSID and WEP

settings.

y A wireless client computer must be in infrastructure mode, so that it

can associate with an AP.

y The SSID of the wireless client computer and the SSID of the AP

must be identical. Or, in case the SSID broadcasts capability of the

AP is enabled (by default), the SSID of the wireless client computer

could be set to “any”.

y Both the wireless client computer and the AP must have the same

WEP settings for them to communicate with each other.