User`s manual

(Note: When doing dynamic bridging, configure Bridge 1 to be in AP Client

mode and configure Bridge 2 to be in AP/Bridge mode. If users are doing

static bridging, make use of the Antenna Alignment Assistance feature to help

align the directional antennas.)

Instead of using PING.exe, users can run Wireless Network Manager on

Computer 1, and go to the Antenna Alignment tab. Click <Start> to begin

monitoring the WDS link quality. Adjust the alignment of the antenna of

Bridge 1 until the Link quality indicator shows a relatively maximal value.

Finally, click <Stop> to stop monitoring WDS link quality. If users are