Product manual

11 Configuring Serial or Ethernet Communication TAC Xenta Server – Gateway, Technical Manual
98 (184) Schneider Electric Buildings AB, June 2011
04-00124-06-en
11.9 Enumerations
Instead of displaying a figure to describe the state of a signal texts can
be used on, for example, values pages. These texts are defined using
enumeration.
11.9.1 Creating enumeration
By creating enumeration in the device editor for the signal you can let
the status of a signal be displayed in clear text, rather than as a number.
To create enumeration
• In the device editor, on the row for the required signal, dou-
ble-click in the Enumeration cell and then click Create Enumer-
ation.
For more information about creating enumeration, see TAC Xenta
Server – TAC Networks, Technical Manual or the XBuilder Help.
11.9.2 Using enumeration
The enumeration can now be used for the signal.
To use enumeration
1 On the row for the required signal, click in the Enumeration cell
and then click the required enumeration.
2 Press ENTER.
3 Save the device template.
4 Quit the device editor.