Product manual

10 Using Signals TAC Xenta Server – Gateway, Technical Manual
90 (184) Schneider Electric Buildings AB, June 2011
04-00124-06-en
10.3.2 Using the Find and Replace Function
In the connection manager there is a find and replace function that is
very useful, for example, if you have several devices of the same kind
on your communication interface and you only need to rename a part of
every signal name to make a second device.
To use the Find and Replace function
1 Click the Show Find and Replace check box.
The Find and Replace area becomes visible.
2 In the Find what box, type the text you want to locate.
3 In the Replace with box, type the replacement text.
4 If required, click Match case and/or Match whole word.
5 Click Find Next to start the search.
6 A matching text is displayed by highlighting the cell in which the
text is found.
•Click Replace to replace the matching text in the current cell
and then click Find Next to continue the search.
•Click Replace All to replace all matching texts in the connec-
tion manager.
7 Click OK.
Note
The search starts from the currently highlighted cell and contin-
ues downwards. Ensure to highlight the first cell on the first row
to search the whole connection manager.