Product manual

TAC Xenta Server – Gateway, Technical Manual 9 Creating SNVTs
Schneider Electric Buildings AB, June 2011 77 (184)
04-00124-06-en
The .xif file for the Xenta 913 is created when you generate the
project. It is automatically downloaded to the Xenta 913 when you
send the project to the Xenta 913.
For more information about replacing the .xif file in a classic Vista net-
work, see Classic Networks, Technical Manual.
Use the Vista System Plug-in to replace the. xif file for the Xenta 913
in the LNS database. For more information about replacing the .xif file
using the Vista System Plug-in, see LNS Networks, Technical Manual.
Tips
• In this example, you will find the .xif file in the following loca-
tion:
C:\Project_ACME\ACME_Gateway\TargetImage\con-
figdb\lon\TAC_Xenta_913.xif.
• You can generate a new .xif file without generating the project:
• In the network pane, right-click TAC_Xenta_913 and click
Generate XIF File.
• You can update the Vista database with the new .xif file and
make the SNVTs available in Vista by replacing the .xif file for
the LonWorks device.
• You can update the LNS database with the new .xif file and bind
the new SNVTs before you send the project to the Xenta 913. By
doing so the Xenta 913 receives the new values as soon as the
project is sent from XBuilder.