Product manual

TAC Xenta Server – Gateway, Technical Manual 8 Connecting to the LonWorks Network
Schneider Electric Buildings AB, June 2011 67 (184)
04-00124-06-en
8 In the properties pane, under General, in the Period (s) box, type
the required transfer period in seconds. In the example, “10”.
The value of the From signal is now transferred to the To signal at
the specified interval. In the example, the Modbus Link ComsFail
signal is transferred to Usage_Link_ComsFail in RTU4 every 10
seconds.
In the example, repeat the procedure above to add more connection
objects to ACME_Gateway-Engineering-Connection_Objects..
Your project should now appear as follows:
The status signals for the Modbus link and the PM710 device are
transferred to RTU4 every 10 seconds.
Table 8.1: Status signals transferred from PM710 to RTU4.
Connection Object
names
PM710_Signals RTU4_Signals
Link_ComsFail ACME_Gateway-
Engineering-ComsFail
ACME_Gateway-Engineering-
RTU4_Signals-
Usage_Link_ComsFail
Link_online ACME_Gateway-
Engineering-online
ACME_Gateway-Engineering-
RTU4_Signals-Usage_Link_online
Device_ComsFail ACME_Gateway-
Engineering-
PM710_Signals-ComsFail
ACME_Gateway-Engineering-
RTU4_Signals-
Usage_Dev_ComsFail
Device_online ACME_Gateway-
Engineering-
PM710_Signals-online
ACME_Gateway-Engineering-
RTU4_Signals-Usage_Dev_online