Product manual

TAC Xenta Server – Gateway, Technical Manual 8 Connecting to the LonWorks Network
Schneider Electric Buildings AB, June 2011 65 (184)
04-00124-06-en
8.3.1 Adding Signal Objects for RTU4
Signal objects can be created in the system pane for the LonWorks sig-
nals that are to be used in XBuilder.
To add signal objects for RTU4
1 In XBuilder, in the network pane, drag the required signals to the
destination folder in the system pane. In the example, drag the IP
Backbone-TAC_Xenta_913-LON-ACME_Inc-2nd_Floor-RTU4-
online signal to the ACME_Gateway-Engineering-RTU4_Signals
folder in the system pane.
2 In the example, drag the following signals from the IP Backbone-
TAC_Xenta_913-LON-ACME_Inc-2nd_Floor-RTU4-
Public Signals-Cooling folder to the destination folder
ACME_Gateway-Engineering-RTU4_Signals in the system pane:
• Usage_Dev_ComsFail
• Usage_Dev_online
• Usage_Frequency
• Usage_Inst_curr_ph_1
• Usage_Link_ComsFail
• Usage_Link_online
• Usage_Prim_curr_tr
• Usage_Sec_curr_tr
• Usage_Total_real_power
• Usage_Volt_ph_1_to_N