Product manual

8 Connecting to the LonWorks Network TAC Xenta Server – Gateway, Technical Manual
64 (184) Schneider Electric Buildings AB, June 2011
04-00124-06-en
8.3 Connecting Signals to and from LON
Once the serial communication network and the LonWorks network are
in place, the Xenta 913 is used to transfer values between the devices on
the networks. The physical signals from the networks are connected to
connection objects or multi-connection objects in XBuilder.
The following example connects signals from the energy meter to pub-
lic signals in the RTU4 Xenta device. The workflow is the same if sig-
nals are to be connected to SNVTs in a device on a LonWorks network
or to any other connected network, such as I/NET or BACnet.