Product manual

8 Connecting to the LonWorks Network TAC Xenta Server – Gateway, Technical Manual
60 (184) Schneider Electric Buildings AB, June 2011
04-00124-06-en
8.1.1 Inserting a LonWorks Network in TAC XBuilder
The TAC Xenta 913 object in XBuilder has a LON object which is used
when the physical network is inserted.
The Vista server must be running before it is possible to insert the net-
work.
To insert a LonWorks network in TAC XBuilder
1 Start Vista Server with the network you want to insert.
2 In XBuilder, in the network pane, right-click the LON object to
which you want to insert a network. In the example, IP Backbone-
TAC_Xenta_913-LON.
3 Click Insert Network from TAC Vista.
The Log in to TAC Vista Server dialog box appears.
4 In the Username box type a user name. In the example, “system”.
Notes
•Use Insert Network from TAC Vista to insert both LNS net-
works and classic networks from TAC Vista.
• The command Insert Network from LNS is used to insert an
LNS network that only uses SNVT communication and that is
created without using TAC Vista.