Product manual

6 Visualizing Signals TAC Xenta Server – Gateway, Technical Manual
50 (184) Schneider Electric Buildings AB, June 2011
04-00124-06-en
6.2.1 Changing the Unit of a Signal
The ACME_Gateway project uses the U.S. system of measurement. If
required, any individual signal can be changed to display an SI unit. For
example, the Tot_real_power is displayed in Btu/s but can easily be
changed to display kW instead.
To change the unit of a signal
1 In the system pane, click the required signal. In the example,
ACME_Gateway-Engineering-PM710_Signals-Tot_real_power.
2 In the properties pane, under Measurement System, in the Unit
list, click the required unit. In the example, W.
3 In the properties pane, under Measurement System, in the Unit
Prefix list, click the required prefix. In the example, k.