Product manual

6 Visualizing Signals TAC Xenta Server – Gateway, Technical Manual
48 (184) Schneider Electric Buildings AB, June 2011
04-00124-06-en
6.2 Adding a Signal
In the following example, you add the signals from the Modbus device,
that is, the energy meter PM710.
To add a signal
1 In the network pane, drag the required signals to the destination
folder in the system pane.
In the example, drag the following signals from IP Backbone-
TAC_Xenta_913-Modbus_Master:
• ComsFail
• OutsFail
•InsFail
• online
to the destination folder ACME_Gateway-Engineering in the sys-
tem pane.
Tip
• If you want to add multiple signals, press and hold SHIFT while
you click the required signals.