Product manual

B Protocols TAC Xenta Server – Gateway, Technical Manual
132 (184) Schneider Electric Buildings AB, June 2011
04-00124-06-en
B.2.4 Modbus I/O Signals
Each Pseudo Slave device represents a logical group of I/O signals
within the LON or I/Net control system. The device editor is used to cre-
ate new pseudo-slave types, or to modify existing types, as shown in the
following screenshot.
Each signal can be used to allow the Modbus master to access a LON or
I/Net value as if it was a register within a slave device. Values written
by the master can be read by the interface, and values written by the
interface can be read by the master.