Specifications

101
INSTRUMENTATION
2009
2010
DATA NETWORK TESTER
▼ GENERAL CHARACTERISTICS
SIGNALTEK™ is the most convenient Gigabit Ethernet tester presently available. To check whether a link is capable of supporting a
specific application, it transmits Ethernet packets along the link and measures its capacity in accordance with the Gigabit Ethernet
IEEE802.3ab standard – the best performance measure for any network.
• Exhaustively tests al data, video and audio applications.
• Runs tests including wiremaps and lengths of 1, 3 and 4 UTP/STP pairs and 6/59 series coaxial cable as
per standards TIA-568 A/B and TIA-570
• Runs a complete test with Gigabit Ethernet packets in around 35 seconds with 97% certainty
• Includes a TDR (Time Domain Reflectometer) for accurate cable run length measurements and identifies faults
in cable runs returning the distance to the open/short circuit
• The provided alligator clips are suited for testing household devices, loudspeakers, alarms, thermostats
and many other control systems.
▼ TECHNICAL CHARACTERISTICS
• Qualifies Gigabit performance – as per IEEE802.3ab
• User selectable testing – test VoIP, Video IP and Data
• Gigabit Ethernet link testing in just 10 seconds
• Configurable monitoring duration to facilitate detection of intermittent faults
• AUTOTEST first detects what is connected to the far end of the cable, whether the SIGNALTEK remote unit,
an active unit or an open link, and then launches a suitable test suite
• User friendly graphic interface for quick, intuitive operation
• Internal test data storage – memory capacity for up to 20,000 tests
• USB interface – download data and read test results.
• Clear, full qualification report printout.
▼ SPECIFIC CHARACTERISTICS
SIGNALTEK™ simplifies the storage and documentation of test data : the SIGNALTEK™ storage and documentation system is ver-
satile and easy to use, and is specially designed for network installation and service technicians.
• Produces simple pass/fail reports as per IEEE 802.3ab
• Stores up to 20,000 tests in its on-board memory
• Can be connected to USB drives for increased storage
• Direct printout to supported USB printers
• No special software required; reports display on any web browser
TYPES OF CABLE
• Voice/telephony cable - USOC/RJ11/RJ12 interface
• Data cable - (STP/UTP) RJ45 for CAT3/5e/6/6a/ cabling systems
• Coaxial cable – via RJ45 F patch cord, series 58/59, cabling 6 (75 ohm)
CABLE RUN LENGTH MEASUREMENT
• Exceeds IEEE802.3 specifications
BATTERY LIFE: STANDARD AA ALKALINE BATTERIES
• Stand-by - 90 days
• Cable test - 30 hours
• Network monitoring - 4 hours
PORTS/CONNECTIONS
• RJ45 interface
• Mini-USB "A" port
• Standard USB "B" port
• CC input for network continuity monitoring
PHYSICAL DIMENSIONS
• Display unit: 201 mm x 91mm x 38 mm
• Remote unit :173 mm x 89 mm x 38 mm
• Display unit weight: 354 g without batteries
• Remote unit weight: 255 g without batteries.
■ SIGNALTEK™ cable qualifier
Code Description Package Pack Pcs
24449 SIGNALTEK™ cable qualifier Bag 1
24449