User`s manual

– 262 –
C HAPTER 7 | Performing System Maintenance
Restoring Factory Defaults
RESTORING FACTORY D EFAULTS
Use the Factory Defaults page to restore the original factory settings. Note
that the LAN IP Address, Subnet Mask and Gateway IP Address will be
reset to their factory defaults.
P ATH
Maintenance, Restart Device
CLI R EFERENCES
"system restore default" on page 275
WEB I NTE R FACE
To restore factory defaults:
1. Click Maintenance, Factory Defaults.
2. Click Yes.
The factory defaults are immediately restored, which means that no reboot
is necessary.
Figure 135: Factory Defaults
UPGRADING F IRMWARE
Use the Software Upload page to upgrade the switch’s system firmware by
specifying a file provided by Micronet. You can download firmware files for
your switch from the Support section of the Micronet web site.
PATH
Maintenance, Software Upload
WEB INTERFACE
To upgrade firmware:
1. Click Maintenance, Software Upload.
2. Click the Browse button, and select the firmware file.