User`s manual

– 219 –
C HAPTER 5 | Monitoring the Switch
Displaying Information About Security Settings
Figure 99: NAS Statistics for Specified Port
DISPLAYING ACL
S TATUS
Use the ACL Status page to show the status for different security modules
which use ACL filtering, including ingress port, frame type, and forwarding
action. Each row describes a defined ACE (see page 88).
P ATH
Monitor, Security, Network, ACL Status
P ARAM ETE R S
These parameters are displayed:
◆ User – Indicates the ACL user (see "Configuring User Privilege Levels"
on page 57 for a list of software modules).
◆ Ingress Port – Indicates the ingress port to which the ACE applies.
Possible values are:
■
Any: The ACE will match any ingress port.
■
Policy: The ACE will match ingress ports with a specific policy.
■
Port: The ACE will match a specific ingress port.
◆ Frame Type – Indicates the frame type to which the ACE applies.
Possible values are:
■
Any: The ACE will match any frame type.
■
EType: The ACE will match Ethernet Type frames. Note that an
Ethernet Type based ACE will not get matched by IP and ARP
frames.
■
ARP: ACE will match ARP/RARP frames.
■
IPv4: ACE will match all IPv4 frames.