User`s manual

2. Setting Up the TCP/IP Protocol

2.1 System Requirements

1. One PC with: (a) Pentium 100 or above, 64 RAM, Windows 98 or above;

(b) Ethernet card or COM port

2. One standard straight-forward RS-232 cable (female connector to Gateway

side).

3. PBX extension Lines or PSTN Lines.

4. Software tools: (a) Hyper Terminal, TELNET, or Web Browser; (b)

Gatekeeper (optional).

Note: Since the Line function feature starts from L1, please plug the

telephone lines from L1.

2.2 IP Environment Setting

User must prepare a valid IP address for Gateway’s proper operation.

For testing the validation of chosen IP address, using the same IP

configuration in other PC or Notebook, and then try to connect to Public

Internet (go to well-known website, receive Internet mail, or ping a specific

public IP address). If it works, use the same IP address and network

configuration for Gateway.

Please follow up the steps for the configuration of your computer or notebook.

2.2.1 For Windows 2000/NT

Please make sure that the network interface of your computer is

working fine and the cross-over line (RJ-45) is connecting with the

computer correctly or you could use a hub to connect with your

computer and this Gateway. Turn on your computer and configure the

network parameter as follow:

1. Go to the start menu and enter the setting area. Click control