User`s manual

51
$sysconf -service 2 (HotLine service)
$sysconf -2nddial 0 (2nddial off)
$h323 -mode 1 (peer-to-peer mode)
Line To Line feature should be used together with:
$sysconf -service 2 (HotLine service/Line To Line )
$sysconf -2nddial 1 (2nddial on)
$h323 -mode 1 (peer-to-peer mode)
Example:
bureau -pstn 2011 2012 2013 2014 2015 2016
bureau -hotline [phone] 192.168.4.200 999
usr/config$
Parameter Usages:
- print display bureau line information and configuration.
usr/config$ bureau -print
Bureau line setting relate information
PSTN number : 2011 2012 2013 2014 2015 2016
Hold tone generation: On
Hot line / Line to Line table
=====================================================
Port Destination Address Remote TEL/CHANNEL
-----------------------------------------------------
1 192.168.4.69 628
2 192.168.4.69 628
=====================================================
- pstn PSTN number (per port basis). This number is used to
display as a caller ID when the caller ID is not available.
The maximum digit length is 32.
- hold while the terminals support H.450 hold function, the
Micronet FXO Gateway will play the hold tone to PSTN
side.
- table Set Hot line/LineToLine destination IP and e164