User`s manual

50
Parameter Usages:
- print display current grouping information
- enable enable grouping function
- disable disable grouping function
- number set how many groups will be divided
- pattern set how many members in each group
- e164 set e164 of each group
For ex: if users need to divide Micronet FXO Gateway into L1 in the 1
st
group, and L2 in the 2
nd
group), and have them register to gatekeeper
separately (e164=100 for 1
st
group; e164=200 for 2
nd
group). They
have to use the following command:
usr/config$ group –pattern 1 3 –e164 100 200
4.2.21 [bureau] command
Type bureau to display the command usage.
usr/config$ bureau
Bureau line setting information and configuration
Usage:
bureau [-pstn number] [-hold used] [-hotline [Port DestIP TELnum]]
bureau -print
-print Display Bureau line information and configuration.
-pstn PSTN number (per port basis). This number is used to display as a
caller ID when the caller ID is not available. The maximum digit length
is 32.
-hold Specify the hold tone generation (using PCM file). (On/Off)
Setting value (On=1, Off=0).
-table Set Hot line/Line To Line information. (Port range: 1~6)
Note:
Hotline feature should be used together with: