User`s manual

49
incompatibility with other devices.
2. If user wants to use T.38 fax under fast start mode, please make
sure “h245fs” function is enabled, or fax can’t work normally.
4.2.20 [group] command
This command is for grouping 4 ports of Micronet FXO Gateway. If
users need to register at least 2 numbers separately to gatekeeper,
then this command is needed for such an application.
usr/config$ group
PSTN side grouping information and configuration
Usage:
group -print | -enable | -disable |
-number group_number -pattern pattern_numbers -e164 e164_numbers |
-pattern pattern_numbers -e164 e164_numbers |
-e164 e164_numbers
Command:
-print : Print current group configuration
-enable : Enable PSTN Grouping
-disable : Disable PSTN Grouping
-number : Set number of divided groups
-pattern : Set number of members in each group
-e164 : Set E.164 number for each group
Example:
group -print
group -enable
group -disable
group -number 2 -pattern 3 3 -e164 01 02
group -pattern 3 1 -e164 100 200
group -e164 11 22