User`s manual

43
press 101 or 102 dialing to line1 or line2 of
Micronet SP5052 after hearing greeting of Micronet
FXO Gateway.
-e164 e164 number, which is registered as phone number in
gatekeeper.
-alias h323 ID, an identification in h323 world for other parties’
recognition. The field might be used as a key of
authorization or accounting in some VoIP application. It
is recommended to assign a special name, or it might
conflict with other devices.
-gkdis Switch ON or OFF gatekeeper discovery function (1 =
ON; 0 = OFF). When it’s ON, Micronet FXO Gateway will
send GRQ with GK ID to default gatekeeper. If the GK ID
didn’t matched, GW will send GRQ with GK ID in
multicast.
-rtp to allocate RTP port range—NOT RECOMMENDED.
This may be used when RTP port range conflicts with
Firewall policy.
-h225 Configure H225 RAS port number manually.(N/A).
-q931 Configure H225 Signal port number manually.(N/A).
-ttl to set timer for TTL(Time To Live). Micronet FXO
Gateway would send RRQ, with keepAlive, to
gatekeeper periodically according to TTL timer.
-gkfind gatekeeper finding port. Port number, which Micronet
FXO Gateway uses it to discover a gatekeeper. Default
value is 1718.
-gwtype to set Micronet FXO Gateway register mode as terminal
or Gateway,0 as terminal 1 as Gateway. Please notice
that if set Micronet FXO Gateway as terminal mode,
must set sysconf –2nddial 1(refer to 5.12).
-ras to set default gatekeeper RAS port number. Default
value, 1719, is well-known port for RAS communication.
-range to allocate dynamic port range, which Micronet FXO
Gateway might be using.
-respto response timeout. Max waiting time for 1st response to a