User`s manual

42
-print print current h323 related settings
-mode alternatives for gatekeeper or peer-to-peer mode
(0=gatekeeper mode; 1=peer-to-peer mode). If users
select gatekeeper mode, a extra gatekeeper is need
when Micronet FXO Gateway is in operation.
-gk To assign gatekeeper’s IP address when Micronet FXO
Gateway is in gatekeeper mode.
-gkname To assign Gatekeeper ID when Micronet FXO Gateway
is in gatekeeper mode.
-dfgw to set IP address of default Gateway, this function is the
same as Microsoft NetMeeting.
A. To implement this feature both endpoints must be
under peer-to-peer mode.
B. If the other endpoint is FXO products, such as
Micronet SP5050 Series, which have to set as
sysconf –2nddial 0 to make one-stage dialing.
z From PSTN side dial in Micronet FXO Gateway,
when hearing greeting user can dial remote PSTN
number under default Gateway, Micronet FXO
Gateway will automatically dial to default Gateway,
then default Gateway will dial this number to PSTN
side.
z For example, user wants to dial from Micronet FXO
Gateway A to ext.888 under Micronet FXO
Gateway B, user only have to dial 888 after hearing
greeting of Micronet FXO Gateway .
C. If the other endpoint is FXS products such as
Micronet SP5002/5004: From PSTN side dial in
Micronet FXO Gateway, when hearing greeting
user can dial line number of Micronet
SP5002/5004.
z For example ,user wants to dial from Micronet FXO
Gateway to Micronet SP5052，the configuration of
SP5052 is h323 –line1 101 –line2 102，user can