User`s manual

36
Parameter Usages:
-enable enable the DDNS function
-server enter the server address of the DDNS server you use
-hostname enter the domain name address which you get from
the DDNS server
-id key in your id
-passwd key in your password
-checkIP enable or disable the check current user’s IP address
-checkIPsrv1 enter the IP address of the check server
-checkIPsrv2 the secondary IP address of the check server
-delay service delay time
-force execute the DDNS function all the times
Note: Support DDNS Server: www.3322.org, www.dyndns.org.
4.2.14 [sysconf] command
This command displays the system information and configuration.
usr/config$ sysconf
System information and configuration
Usage:
sysconf [-service type] [-plan digits] [-2nddial flag]
[-keypad dtmf] [-ringdet method] [-callalive flag]
[-port s1 s2 s3 s4 ]
[-seizure mode] [-2nddial switch]
[-drule [in_filter str1] [in_drop str2] [in_insert str3]
[out_filter str4] [out_drop str5] [out_insert str6]]
[-askpin f] [-pincode [set1 pin1] [set2 pin2] [set3 pin3] [set4 pin4]]
sysconf -print
-print Display system overall information and configuration.
-service Specify Gateway service type.
(0: Dial in service, 1: Direct in service
(2: HotLine/LineToLine 3: Transient service.)