User`s manual

33
number plan very well to avoid the numbering conflict. If users
already defined “0” for specific trunk Gateway, other terminal
started with “0” shall be avoided, or the number will be routed to
the trunk Gateway defined “0”.
2. If user wants to set 2 sets of similar e164 such as 123 and 1234,
please be careful configure 123 first, or it may cause problem
when user dial 1234, Micronet FXO Gateway may dials out IP
address of 123.
3.
(1) If called party is FXO product, please set e164 of pbook as e.164
of called party, and remember to set sysconf –drule in_drop
“e.164”(refer to 5.12.)in called party.
(2) If called party is FXS product, please set e164 of pbook as prefix
of called party, when dialing to different line of FXS product,
please dial line number.