User`s manual

32
number for it.
-modify modify an existing record. When using this command,
users have to specify the record’s index number, and then
make the change.
Phonebook Rules:
To meet the requirements of communicating with trunk Gateway or
other applications, Phonebook has following characteristics to be
noticed.
When the destination side is a terminal, for ex: IP Phone or soft phone,
e164 number stands for exact destination phone number.
When the destination side is a Gateway, for ex: T1/E1 Gateway, e164
phone number stands only for Gateway prefix. That is to say, users
have to continue to dial destination number, following the prefix
number. A example is as below:
A Æ Micronet FXO Gateway
In Phonebook, there’s a record:
Index Name IP E164
1 B_Gateway 192.168.1.2 0
B Æ E1 trunk Gateway, which connects to PSTN with E1 PRI.
If users want to make a call to PSTN number “82265699”, they have to
pickup one of the phone connected to Micronet FXO Gateway, and
then dial “082265699”. After receiving the complete dialed number,
Micronet FXO Gateway will search for its Phone Book, find “0” as
matched prefix, and then dial out to B’s IP address directly with
destination e.164 (phone number) “82265699”. Pleased be noted that
“0” is eliminated from Micronet FXO Gateway itself.
Note:
1. Because of above characteristics, users have to take care of the