User`s manual

2. Disconnect Tone Analysis : please follow instructions on screen ;

first call in line1 of Micronet FXO Gateway from PSTN side(now

can’t hear greeting), hang up the phone and press “enter” to start

record disconnect tone. Finally, choose “y/n” to save data analyzed

or not. Notice that system will save one set of frequency analyzed

and 4 set different on/off time in

“busytone1”,”busytone2” ,“reordertone1” , “reordertone2” (Please

refer to tone command) .

If Micronet FXO Gateway still can’t hang up call correctly, it could

be tone cadence issue (on/off time). Please count on/off time and

configure it into tone command.

usr/config$ greetrd

==================================================

Welcome to Voice Record/Analysis Mode

--------------------------------------------------

1.Greeting Voice Record.

2.Disconnect Tone Analysis.

3.exit.

--------------------------------------------------

Please input function(1~3): 2

2.Disconnect Tone Analysis.

Please Dial-in "Line 1" and then Hang up the phone!!!

Press "Enter" to start record!!!

Waiting for Disconnect Tone from PSTN....

Disconnect Tone Detected....

Starting Record...

Set parameters to flash? (Y/N)