User`s manual

24
AC4804[2] is OK
Successful
Initialize OSS libraries...OK!
open stack successful
cmInitialize succeed!
GK mode selected.
login:
4.2.5 [flash] command
This command will clean the configuration stored in the flash rom and
reboot Micronet FXO Gateway in factory default setting.
Parameter Usage:
-clean clean all the user-defined value, and reboot Micronet FXO
Gateway in factory default mode.
Note: It is recommended that use “flash –clean” after application
firmware id upgraded.
Warning: Once users execute flash –clean, all the configurations of
Micronet FXO Gateway will be cleaned. This can only be executed by
user who log in with root
4.2.6 [commit] command
Save changes after configuring the Micronet FXO Gateway.
usr/config$ commit
This may take a few seconds, please wait....
Commit to flash memory ok!
usr/config$
Note: Users should use commit to save modified value, or they will
not be activated after system reboot.