User`s manual

Example 3

This configuration shows an example for P2P calling to a representative number. When a

PSTN call is coming to SP5058A FXO port, it will start the call routing and make the p2p call

to the sip trunk number of SP5008A which provides serial line hunting. The same as

SP5008A to route to SP5058A’s sip trunk number.

A. Configuration SP5008A

Step 1:

Check the primary proxy and sip trunk number enable option, and then setup the required

parameters of the sip trunk number. Apply it.

Since the P2P call will be used for this sip trunk number, uncheck the primary proxy and

apply it.