User`s manual

3.5.4 Upgrade Firmware

Http Upload Specify the location of the firmware for

uploading through Http.

1. Under Device Management => Software Upgrade web menu, specify the location of

the firmware by clicking the Browse button next to the Http Upload text box.

2. You will be prompted with a window requesting the location of the firmware.

3. Locate the firmware that is stored in your hard drive.

4. Once located, click the Open button.

5. Back in the web configuration menu, press the Start button (next to the Http Upload’s

browse button) to execute the upgrade process.

6. Please wait while the device updates itself with the firmware.

7. After the update process is finish, you will be taken to a web page indicating that it was

successful (see figure below).

Note: For consistency, it is recommended to reload default setting every time you update

the firmware on the MICRONET SP50X8A. However, you will lose all the settings

configured on the MICRONET SP50X8A except Network configuration. For more details

on reload default setting, please refer to the next page below.