User`s manual

62
3.4.9 Call routing Editor
Call Routing
z Status: enable or disable this routing
z Prefix: matched DNIS (called number)
prefix.
z Min Length: matched DNIS minimum
length. This DM can only be executing
when the received DNIS is longer than
it.
z Route to: The outgoing call type could
be (FXO / FXS / VOIP /P2P )
Backup route to: If primary route is
unable to reach the destination,
whether to use the backup routing or
not. The backup outgoing call type
could be (FXO / FXS / VOIP /P2P)
which require being different as the
same type of primary route.
z DM Group: The DM group here can be
used as the DM after routing rule was
selected. It is useful especially when
you have different dialing plan for
backup route.