User`s manual

z Total digit count: 8

If the user dials an 8 digit number (e.g.

82265699), the MICRONET SP50X8A will

immediately detect it and dial this number

straight away.

Third Example

z Function: Disable

z Leading digit: 02

z Total digit count: 10

If the user set the Function parameter as

“Disable”, the call number with a length of

10 digits and a prefix of 02 will proceed as

normal. The user will need to wait until

dial timeout period for the call to be made,

or press the “#” on the keypad at the end of

the dialing number to make the call.

You can configure up to 50 entries in the

Dial Plan.

1. Press the “Apply” button (at the bottom) after you finish to save changes.

2. Press the “Reboot” button to apply the changes.