User`s manual

55
P.S. If the disconnect tone only has single
frequency, please set it to low frequency. If
the disconnect tone only has single
cadence, please set it to Tone 1.
Disconnect tone 2 Specify the pattern of the disconnect tone
for disconnect tone 2 (second set), you can
adjust the high frequency, low frequency,
high level, low level, the On and Off time for
tone 1 and 2.
P.S. If the disconnect tone only has single
frequency, please set it to low frequency. If
the disconnect tone only has single
cadence, please set it to Tone 1.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.