User`s manual

3.3.10 Syslog Setting

This syslog is used to send the debug log from Micronet SP50X8A to syslog

server.

Syslog mode

Select the Syslog mode for Enable or

Disable. If you Enable this feature, please

specify the Syslog Server address and port

number at the Syslog server address and

port’s text box, then you can get detail

system log from Syslog server.

Syslog Server address If you Enable the Syslog mode, please

specify the IP address of Syslog Sever for

data storage.

Syslog Server port Specify the Syslog Server port number,

The default port number is 514.

1. Press the “Apply” button (at the bottom) after you finish to save changes.

2. Press the “Reboot” button to apply the changes.