User`s manual
3
1. Introduction
1.1 VoIP Gateway
Micronet SP5008A / SP5018A / SP5058A are high-capacity SIP Gateway Series that
provides 8 FXS / 4 FXS + 4 FXO / 8 FXO ports, and suit to build an IP-based
communication platform with other VoIP devices. They meet enterprise’s requirement for
functionality (VoIP) upgrade and larger scale implementation by interoperating with legacy
PABX and IP PBX/Soft-switch.
To connect with legacy PABX, SP5018A supports PABX Mode for PSTN backup.
When network or power fails, PSTN lines (FXO) bypass to FXS ports and users still can
make/receive calls via PSTN lines.
SP5008A includes some wonderful PABX features for small business. They help
operate users on various VoIP applications, such as extension calling among 8 FXS ports,
inbound/outbound calls via SIP trunk, DID (direct line), DOD, prefix routing, operator
attendant, etc. Users can easily benefit from the ease-to-use device.
SP5208 supports 2 FXO ports to connect with PSTN lines which are subscribed for
company’s representative telephone number. By just connecting FXO ports, users can
make/receive calls via PSTN lines with default configuration. Company with IP-based
platform still can receive daily phone calls from PSTN or GSM, if the direct calling with
PSTN number to VoIP network is not supported by ITSP/ISP. SP5208 also provides PSTN
backup by FXO connections, even if power or network fails. With the smart designs,
SP5208 is a perfect VoIP solution to small business customers.
1.2 Key Features
z IETF SIP standards compliant
z Support 1 RJ-45 WAN port and 4 RJ-45 LAN ports
z Support POTS interfaces: 8 FXS / 4 FXS + 4 FXO / 8 FXO ports
z Support single-account registration on FXS ports for representative number
z Support extension calling among FXS ports
z Support rich call features: call hold, call transfer, call forward, hotline, warm line, speed
dial, anonymous call, P2P call, etc
z Support PSTN prefix routing (SP5018A only)
z Support PABX mode for legacy PABX function upgrade (SP5018A only)
z Support PSTN lifeline – PSTN bypass in case of power or registration failure (SP5018A
only)