User`s manual

34
proxy.
The default setting is 1000~1007.
Enable Hotline Click the check box to enable hotline feature.
If enabled, The check box will display as .
Hotline Number Specify the number to forward the call to
when the Hotline feature is enabled.
Wait to Hotline(sec) Specify the time (sec) for wait to hotline, the
default value is 0.
Forward Type (FXS only) Specify the forwarding type to use, you can
choose the following:
z Disable
z Unconditional
z Busy
z No Answer
z Busy and No Answer
The “Disable” option will allow you to disable
this particular function.
Forward Number Specify the number to forward the call to
when the call forwarding feature is enabled.
Call Waiting (FXS only) Enable/Disable per-line Call Waiting function.
DND (FXS only) Enable/Disable per-line DND (Do Not Disturb)
function.
Greeting (FXO only) Enable/Disable Greeting for FXO
Anonymous (FXS only) When this feature is Enabled, the calling
number (ANI) will be hided. The hiding
method depends on the setting of “rfc3325
support”.
(Please make sure your proxy server or soft
switch supports the feature, if the proxy does
not support it and you enable this feature, all
IP outgoing calls will be dropped.)
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.