User`s manual

1.4 Appearance
Front panel: The LED lights provide related system messages of the gateway.
SP5012/S
SP5014/S
Power: Light on means Gateway is power on, and vice versa.
TEL: Light on means the line is in use (off-hook), and vice versa.
LINE: Light on means the line is in use (off-hook), and vice versa.
Status:
1. LED light on means Gateway has successfully registered to
Proxy when it is in the Proxy Mode.
2. LED flash means Gateway is not registered to the Proxy when
it is in the Proxy Mode.
3. Or when Gateway is in downloading mode, LED should be
flash as well.
4. LED light off means Gateway is in Peer-to-Peer Mode.
Ready:
1. Light on and slow flash means Gateway is in normal mode.
2. Light on and fast flash means Gateway is in downloading
mode.
WAN: Connected to Public Ethernet
1. Line- LED light on means Gateway is physically connected to
the Ethernet correctly.
2. ACT- LED light on and flash when Ethernet data is being
transmitted / received.
LAN: Switch to another device, such as PC
1. Line- LED light on means Gateway is physically connected to
the Ethernet correctly.
2. ACT- LED light on and flash when Ethernet data is being
9