User`s manual

[min number][max number][hunt number]
route -ip [dst number][SIP number]
route -fxs [dst number][SIP number]
route -fxo [dst number][SIP number]
route -print Routing table information.
prefix The prefix of dialed number.
dst Destination port(FXS:0/FXO:1/IP:2).
e164 Destination e164 number(when destination is FXS or
FXO).
min Min digits.(0 ~ 255)
max Max digits.(0 ~ 255)
hunt Hunt method for busy forward(NONE:0 / GROUP:1 /
ALL:2)
Example:
route -add prefix 100 dst 0 e164 1001 min 1 max 3 hunt 1
route -ip dst 0 e164 1001
route -fxs dst 2
route -fxo dst 0 e164 x
route -modify 1 prefix 100 dst 0 e164 1001 min 1 max 3 hunt 1
route -delete 1
usr/config$
Parameter Usages:
-print print out all routing table information
-add add a routing rule in routing table. User can add less than 50
rules. (route –add prefix “prefix number” dst “destination
port type” e164 “SIP number of port” min “minimum
digits needed” max “maximum digits can’t be
exceeded”)
-delete delete a routing rule in routing table (route –delete “index of
routing rule”)
-modify modify a routing rule in routing table. (route –modify “index
of routing rule” prefix “prefix number” dst “destination
port type” e164 “SIP number of port” min “minimum
digits needed” max “maximum digits can’t be
exceeded”)
-ip create routing table for incoming call from IP side. (route –ip
dst “destination port type” e164 “SIP number of port”)
62