User`s manual

-------------------------------------------------------------------------------
usr/config$ pbook –add name micronet ip 10.1.1.1 e164 1001
usr/config$ line –config 2 hotline 1001
-------------------------------------------------------------------------------
In this example means: if user calls in FXO Line1, gateway
will automatically dial out IP address of “1001”.
-forward set no answer forward table for FXS Lines.
Only FXS Lines provides No Answer Forward function. For
call forward function, it can works under Proxy or P2P mode.
(1) Proxy Mode Usage:
-------------------------------------------------------------------------------
usr/config$ line –config 1 forward 1002
-------------------------------------------------------------------------------
In this example means: if user calls in FXS Line and hasn’t
been answered in forward time (please refer to [sysconf
-forwardtime] command), gateway will automatically forward
this call to phone number “1002”.
(2) P2P Mode Usage:
-------------------------------------------------------------------------------
usr/config$ line –config 1 forward 1002
-------------------------------------------------------------------------------
In this example means: if user calls in FXS Line1 when Line1
is busy, gateway will automatically forward this call to IP
address of “1002” in Phone book.
5.14 [route]
This command is to set routing table for Gateway.
usr/config$ route
Routing table information and configuration
Usage:
route -add [prefix number][dst number][e164 number]
[min number][max number][hunt number]
route -delete index
route -modify index [prefix number][dst number][e164 number]
61