User`s manual

dynamic IP Address is not working in Peer-to-Peer mode.
-----------------------------------------------------------------------------------------------
usr/config$ ifaddr -ipsharing 1
-ipchange This is for a special function of IP-Sharing. Some devices
could support different ip address from WAN and DMZ port.
This function has to be enable if the ip address of DMZ port
is different from the WAN port.
-----------------------------------------------------------------------------------------------
usr/config$ ifaddr -ipchange 1
-cmcenter Specify a management center IP Address. Micronet will
provide a management center program to do centralized
control for all devices.
5.8 [time]
When SNTP function of Gateway is enabled and SNTP server can be
found as well, type time command to show current network time.
-----------------------------------------------------------------------------------------------
usr/config$ time
Current time is THU JAN 01 05:29:23 1970
5.9 [ping]
Use ping to test whether a specific IP is reachable or not.
For example: if 192.168.1.2 is not existing while 192.168.1.254 exists.
Users will have the following results:
usr/config$ ping 192.168.1.2
no answer from 192.168.1.2
usr/config$ ping 192.168.1.254
53