User`s manual

5.4 [reboot]
After commit command, type reboot to reload Gateway in new
configuration. The procedure is as below:
usr/config$ reboot
.Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
Hardware auto detect...
Hardware Type : 1FXS + 1FXO
HTTPD initialized...
VoicePacketizermain comming
WorkMode : PROXY_MODE
incoming InitCallArray....REAL_MAXCALL=4
SIP stack was constructed successfully. Version - 2.2.1.8
Start registering to Proxy server
AC4804[0] is ok
successful 1 4
Initialize OSS libraries...OK!
VP v1.44 stack open successfully.
login:
5.5 [flash]
This command will clean the configuration stored in the flash ROM and
reboot Gateway in factory default setting.
Parameter Usage:
-clean clean all the user defined values, and reboot Gateway in
factory default mode.
Note: It is recommended that use “flash –clean” after application firmware
id upgraded.
50