User`s manual

this routing if the number I dial is between 1 and 10 digits. If I dial over

10 digits, this call will follow the default routing.

● Hunt – Define the hunt group function.

None – Disable this function

Group – The call will search other ports to be the destination with the

same group if the origin destination is busy.

All – The call will search other ports to be the destination with the same

type if the origin destination is busy.

2 Press Add Data button to save the configuration and press the Routing

Table button again to reload the configuration. (see figure 3.13)

Figure 3.13: New Special Routing

When users dial 0 with the first digit of the numbers (from FXS side), or from

FXO and IP side. And the numbers you dial is between 1 and 10 digits. If this

call matches the rule, it will be transferred to the FXO port whose E164 number

is 1002.

3 Please Commit it and Reboot the system if the configuration is finished.