User`s manual

Add a new Routing Table
1 The default setting is changed after you press the Change Default button.
Please press the Routing Table button again to show the new setting. (see
figure 3.12)
FIGURE 3.12: EDIT AND ADD A NEW ROUTING TABLE
● Index – Define the number of this data.
● Prefix – Define the number you dial. You could just define the first digit
of the numbers
● Destination – Define the destination of this rule. There are three
directions of the destination.
● E164 – Define a right E164 number of the destination you want.
For example: There are two FXO ports of the gateway (SP5014/S) and I
want the first FXO port (1002 is the default E164 number) to be the
destination. So the E164 number I have to define is 1002.
● Min Digits – The minima digits you dial.
● Max Digits – The maxima digits you dial.
The min and max digits are the range for the number you dial. For
example: The min digits is 1 and max digits is 10. The call will follow
38