User`s manual

3 Advanced
There are too many advanced commands for the advanced users. The
following chapters are based on the application layer. Please get the info what
you need. If you need the command, please watching the chapter of Command
Line Interface.
3.1 Line
The Line configuration will show the status of the registrations and the ports. It
includes the hunt group, hotline, and no answer forward configuration. Press
the Line configuration button to enter configuration table (see figure 3.1)
Figure 3.1: Line Configuration
● Type – Show the type of this port. There are only two types of this
gateway. One is FXS type another is FXO type. It couldn’t be changed.
● Hunting Group – Define the group number of this port. When the port is
busy, the call could be transferred to another port in the same group.
● Hotline – Enable or Disable the hotline mode. The hotline mode will be
enabled if you enter the hotline number. The default setting is disabled.
● No Answer Forward – When the port didn’t answer the call, this call will
26