User`s manual

2.4 Making a VoIP Call

There are two modes that you could configure the gateway for making VoIP

calls. One is the Peer-to-Peer mode, another is Proxy mode. The

configurations and functions are different. Please make sure about the mode

you want and follow up the step to configure your gateway.

2.4.1 Configure the gateway into the Peer-to-Peer mode

1 Enter the SIP Configuration table and change the mode to Peer-to-Peer.

Define the port numbers whatever you like. Press the “OK” button if the

configuration is all finished. (see figure 2.13)

Figure 2.13: Configure the Peer-to-Peer mode

2 Enter the Phone Book configuration table and configure the name, ip

address and phone number of the destination. (see figure 2.14)