User`s manual

55
Expires:3600
Registering to: Sip:80.248.33.37 with the following :
To:sip:sipcenter1165@80.248.33.37
From:sip:sipcenter1165@80.248.33.37
Contact:sip:sipcenter1165@210.59.163.143
Expires:3600
Account: sipcenter1123 registration succeeded
Account: sipcenter1165 registration succeeded
AC4804[0] is ok
successful
Initialize OSS libraries...OK!
VP v1.40 stack open successfully.
login:
19.4.2 Peer-to-Peer Mode
Peer-to-Peer Mode allows users to call other VoIP devices without the proxy
server. When in Peer-To -Peer mode, SP5001/S will send INVITE message
directly to the destination IP address once the dial is finished. One can use
PhoneBook, which will dial predefined phone number, and press “#” (optional,
to accelerate the dial) as end of dial. Or, users can use SpeedDial button,
which is mapping to user defined PhoneBook, Button1 to PhoneBookIndex1,
and Button2 to PhoneBookIndex2…etc..
To configure Peer-To -Peer Mode in SP5001/S, follow the steps below:
Step 1. Set Peer-To -Peer Mode, using “h323” command
usr/config$ sip –mode 0
Note: mode 0 is for Peer-To -Peer mode, while mode 1 is for Proxy mode.
Step 2. Configure PhoneBook, using “pbook” command.
Users can refer to chapter 19.7.9 [pbook] command for more information.
usr/config$ pbook –add name TEST1 ip 10.1.1.1 e164 10