Product guide

07064 065

Wireless LAN

www.micronet.info

Product specification is subject to change without prior notice.

Product Guide 2010

WISP Backbone and CPE

SP9012N is a cost effective outdoor wireless CPE which is best

suitable for both indoor and outdoor use due to its weatherproof

enclosure design. SP9012N is equipped with outstanding

administration capability which allows users to remotely monitor

and control the device and record its status. Customers can use

SP9012N to connect to other SP9012N devices from one place to

another. At the same time, those SP9012N devices can still work as

access points to accept access point clients (e.g, SP907GP)

connection. Therefore, the customers can easily make wireless

connections from different locations by SP9012N. SP9012N has

been able to achieve three times better throughput than

competitors' wireless products in field test. If the customer needs to

increase the wireless connectivity, SP9012N can collocate with

Micronet SP907GP to transmit its digital data across floors with

best of sensitivity. In addition, although SP9012N has a built-in 8

dBi internal antenna, to extend the wireless distance coverage, the

customer can also use SP9012N with an external antenna (e.g., 12

dBi Omni-directional antenna) to reach a longer distance coverage

as well. For cost sensitive solutions, SP9012 can be used to

replace SP9012N, since it is the best choice among all outdoor

wireless CPEs when constructing a 2.4 GHz outdoor wireless

environment.

SP9015 is a 5.8GHz frequency band and weather proof outdoor

wireless device with high power outage and excellent radio

sensitivity. The customer can use SP9015 to work as an outdoor

wireless bridge, access point, gateway or even the access client

through its simple and friendly web configuration within seconds. If

used with other Micronet outdoor wireless products, for example

SP915A, they can be brought together as the solution for the

wireless back haul of WISP. If one SP9015 is configured with

another SP9015 as a pair, both SP9015 devices can be set into

WDS (Wireless Distribution System) mode to become point-to-

point link. Thus, the wireless system integrators can build a cost

effective outdoor wireless solution with nothing else but a few

SP9015 devices.

Fig 1. Multiple CPEs Solution

Fig 2. CPE works with WISP Backbone Solution