Product guide

036
M-Ring Fault Tolerance
Ring-Coupling
At most of times, Ethernet has its unique
data communication purpose for those
automation applications from industrial
environment. If one link fails, the risk is all
other activities from this network will
become unpredictable. Thus, the
redundant Ethernet path will becomes so
important while facing the hazard of link
failures. Micronet's industrial switch is
equipped with a redundant Ethernet
protocol called M-Ring, it gives the whole
environment connection a very convenient
way to maintain a 24 x 7 workforces
without any activity failure. With Micronet's
M-Ring solution, your environment will
always be kept running and/or can be
recovered very fast in just a few
milliseconds.
For many of Ethernet environment, all
network devices may connect separately
from different locations and have
its own tasks to be taken up
at one site of it, but
occasionally these different
sites'tasks may need to work
shoulder-to-shoulder to take
both of sites'data or to exchange
the information in between.
The local and remote sites need to be
very reliable so that both of them can
fulfill each other without building a huge
single central hub. The Micronet
"Ring Coupling" function helps you
maintain those distributed network
devices into several smaller redundant
rings, without any control line. Still, the
smaller rings coupled in such a way will
still be able to communicate with each
other.
Technical Notes
Model No.
Description
Media
Converter
Media Converter
Others
1 1
2 2
Terminal Block
100Base-FX Port
DIP Switch
10/100M RJ-45 Port
Terminal Block
SFP Slot
DIP Switch
10/100/1000M RJ-45 Port
3 3
4 4
Hard-
ware
PowerInterface
2
1
3
4
2
1
3
4
SP373HS
10/100TX to 100FX
Industrial Media Converter
SP362ID
Gigabit to Mini-GBIC
Industrial Media Converter
DIP Switch 1: Power Alarm
Enable/Disable
DIP Switch 2: Fiber LLF &
LFP* Enable/
Disable
DIP Switch 2: LLF Enable/Disable
DIP Switch 1: Power Alarm
Enable/Disable
DIP Switch 3: 100FX Full-mode/
Half-mode
DIP Switch 4: Switching-mode/
Media-mode
DIP Switch
07037
Industrial Ethernet
Industrial Ethernet
10/100M Port, RJ-45
1
10/100/1000M Port, RJ-45
1
1000M SFP Slot
1
100Base-FX Port
1
Optical Cable
Single-mode: 9/125µm Multi-mode: 50/125µm~62.5/
125µm, Single-mode:9/125 µm
DC 12-48V
DC 12-48V, AC24V
Terminal Block
5.28 Watts
3.36 Watts
Power Consumption
Power Redundant & Polarity
Reverse Protection
-40 - 75°C -10 - 60°C
Operating Temperature
DIN Rail & Wall Mount DIN Rail & Wall Mount
Installation
30 x 95 x 140 30 x 95 x 140
Dimension, W x D x H (mm)
Note: LLF & LFP ( Link Lose Forwarding & Link Fault Pass-Through )
www.micronet.info
Product specification is subject to change without prior notice.
Product Guide 2010