User`s manual

y The Modem’s RJ-11 ports are easy-to-use and do not require

installation of additional wiring. Every RJ-11 modular phone jack in the

home can become a port on the LAN.

y Networking devices can be installed on a single telephone wire that

can span within 1.9km or 800m (depend on speed) between the two

farthest points.

y SP3501AM/S Modem has embedded Splitter between every VDSL

side (Line) and POTS (Phone) side. It permits user to deliver

broadband service on the same lines as Plain Old Telephone Service

(POTS), PBX, ISDN traffic and VDSL Signal.

y When inserting a RJ-11 plug, be sure the tab on the plug clicks into

position to ensure that it is properly seated.

y Do not plug a RJ-11 phone jack connector into the Ethernet port (RJ-

45 port). This may damage the modem. Instead, use only twisted-pair

cables with RJ-45 connectors that conform to Ethernet standard.

y Make sure that the cables are all connected before powering on

devices.