User`s manual

66
 Group Name：The name of the configuration rule.
 WAN Interface used in the grouping: WAN connection that needs to be grouped.
 Available LAN Interfaces: Interfaces that can be grouped.
 Grouped LAN Interfaces: LAN interface that needs to connect with specified WAN
interface.
Example:
Your ADSL line supports two groups of PVC; the PVC that used to transmit network data
is ppp0 and the PVC that used to transmit IPTV data is atm1.and you wish your router’ s
LAN2 port is particularly used for IPTV and the IPTV data will not be sent to other ports.
The configurations are as follows:
Configure two groups of PVC: ppp0 and atm1 (for the configuration steps, please refer to
the chapter for WAN configuration).
Click “ Advanced Setup” -> “ Interface Grouping” to enter the screen below, and click
“ Add” to configure the IPTV grouping parameters.