User`s manual

Name: The name of the configured rule.

Enable: Enable/Disable the rule.

Interface: The interface that needs to configure priority. Precedence: Set a priority for the

selected interface.

Click “ Save/Apply” to save the settings.

4.3.13 Routing

Default Gateway

Gateway is the path for sending packets when your computer is communicating with

computers on other networks. When there are multiple WAN connections, the gateway

must be specified, otherwise, your computer may not be able to communicate with

computers on other networks. When there’ s only one WAN connection, just keep the

default settings.

Click “ Advanced Setup” -> “ Routing” -> “ Default Gateway” to enter the screen

below.

Available Routed WAN Interfaces：Current existed WAN connection.

Selected Default Gateway Interfaces：WAN connection has already been selected as the

gateway.